IBC Tote Adapter
Several types of barrels are commonly used in industrial barrels, such as conventional IBC totes, plastic water towers, and steel drums. They are often used as hazardous waste shipments.
Used in different environments, the transport container has different interface forms to facilitate the long-term barrier-free disposal of liquid hazardous waste.
IBC totes: conventional IBC totes are basically equipped with valve interfaces; plastic water towers: valve interfaces and non-valve interfaces are common; steel drums: basically no valve
IBC tote interface form:
1. Threaded interface
At present, the outlet interface of the tonnage barrel on the market is mainly a screw interface. The thread diameter is mainly related to the selection of the valve. The common DN50 ball interface diameter is 7.5cm, the DN40 ball interface diameter is 6.2cm, and the butterfly valve interface diameter is 6.2cm, 7.5 cm, 9cm, less common is the DN80 ball valve interface with a diameter of 9cm. The difficulty of sealing of this interface is affected by the degree of thread matching.
2. Straight pipe interface
The cost of an IBC tote with straight pipe interfaces is relatively low, and some companies that generate waste will also use this form of IBC totes in order to reduce costs. The current survey has not found relevant data on the diameter of export pipes. This type of interface has a relatively high risk, is likely to cause liquid leakage, and is difficult to seal.
3.Flange interface
At present, it is rare that the IBC tote unloading interface on the market is a flange interface, but this type of interface is easier to connect, and the sealing is easier than the above two types.
Solution:
1. Threaded interface
The flange interface has a universal variable diameter, and the specifications are 6.2cm/ 7.5cm/ 9cm, so fixed C-type quick couplings can be used with different reducing joints, as shown in the following figure: agree to purchase 2 inch C-type quick couplings, with 80 to 50/100 Transfer to 50 and other different reducing joints and coarse-toothed to C-type joints. This solution can keep the pipes connected to the diaphragm pump section unchanged, and only the adapter can be replaced.
Conventional IBC tote valves are coarse threads, and some IBC tote valves are fine threads. Therefore, IBC tote valve adapters can be used for conversion, that is, fine threads to coarse threads
2. Straight pipe interface
It is difficult to seal the straight pipe interface. In order to ensure that there is no leakage during the disposal process, a certain amount of reducing clamps need to be purchased to seal the diaphragm pump and the diameter interface of the water outlet. At this time, one end can be connected to a fixed C-type quick-change connector.
3. Flange connection
The flange interface is less difficult and the connection is more convenient. In order to reduce the cost, the variable-diameter flange can be processed by itself and then connected to the C-type quick conversion joint.
Are you looking for the IBC tote adapter? Qiming Packaging is a professional supplier specializing in IBC tote fittings such as IBC tote valves, IBC adapters, and IBC top lids, and so on. If you are interested, contact us at mail@qiminggroup.com for a better answer. We’d love to work with you together.
Qiming Pack Your More Safety Life!
If you are interested in us, contact us now to get more detail!
Mobile/Whatsapp: 86-15324051286
Company email: mail@qiminggroup.com
