2023 - Qiming Packaging Lids Caps Bungs,Cans Pails Buckets Baskets Trays

Are IBC tanks safe?

15th December 2023/in Qiming Product Knowledge Base/by qiming packaging group

Intermediate bulk Containers (IBCs) are generally designed and manufactured to meet strict safety standards for the storage and transportation of liquids, chemicals, and other materials. However, the safety of IBC tanks depends on various factors, including the design, construction, material compatibility, handling, and usage.

Here are some considerations for ensuring the safety of IBC tanks:

Material Compatibility: Ensure that the material used to construct the IBC is compatible with the substance it will contain. Different chemicals or liquids may react with certain materials, leading to safety hazards.

Design and Construction: IBCs are available in various designs and materials, such as plastic, metal, or a combination of both. It’s essential to choose an IBC that meets the specific requirements of the substance being stored or transported.

Labeling and Documentation: Properly label IBCs with the correct information about the contents, handling instructions, and any potential hazards. Follow all relevant safety guidelines and regulations.

Handling and Transportation: Use appropriate handling and transportation methods, such as using compatible pallets, securing IBCs during transit, and following proper lifting procedures. Ensure that the IBC is not damaged during handling.

Inspection and Maintenance: Regularly inspect IBCs for signs of damage, wear, or corrosion. Any damaged or compromised IBCs should be taken out of service and replaced. Follow the manufacturer’s recommendations for maintenance.

Compliance with Regulations: Ensure that the IBCs meet or exceed relevant safety regulations and standards set by local authorities and international organizations.

Training and Education: Provide training to personnel involved in the handling, filling, and transportation of IBCs. Make sure they are aware of safety protocols and proper procedures.

It’s important to note that IBCs are generally considered safe when used according to the manufacturer’s guidelines and in compliance with applicable regulations. Always follow best practices for the specific type of IBC and material being stored to minimize the risk of accidents and ensure the safety of both personnel and the environment.

Qiming Packaging specializes in IBC containers, with a wide range of sizes to choose from. The following are Qiming Packaging IBC sizes.


Specifications
Capacity	500/800/1000/1200/1500L
Model	DN50/DN80
Material	Outer frame: Galvanized steel; Inner cube: 100% HDPE
Parts	① IBC inner cube x 1; ② Outer frame x 1; ③ Pallet x 1; ④ Top lid x 1; ⑤ IBC valve x 1; ⑥ Plastic protector x 1; ⑦ Valve connecting tube x 1;
Thickness	≈2mm
Forklift port distance	100mm
Top lid(Inlet)	150mm(DN150, 6 inch)/225mm (DN225, 9 inch);
Valve(Outlet)	DN50/DN80 ball valves
Color	White/blue/black
Feature	Resistant to falling and wear, high mechanical strength, cold and heat resistant, acid and alkali resistant
Maximum filling density	2
Stacking limit	Static stacking: 3 layers can be stacked;Dynamic stacking: density＜1.5, 2 layers; density＜2, 1 layer
Packing term	Film packaging, stacking together one by one.
Delivery	Within 1-3 working days(Stock);Within 3-5 working days(Max order);

If you don’t find the size you want, please contact us, we will help you.

Get sample

Send inquiry

Pressitin Tuna Tin Cans Wholesale

15th December 2023/in Qiming Product Knowledge Base/by qiming packaging group

Do you have such trouble? Fresh things are perishable; Plastic packaging products are easy to be deformed by heat; Glass containers break easily; The packaging looks old and unattractive. The package is too big to take out and eat. Now, say goodbye to your worries.

Pressitin Tuna Tin Cans Wholesale

Canned food is safe, hygienic, convenient and various in color. It can be stored for a long time at room temperature.

Canned food can better preserve the color, aroma, taste, and nutritional value of natural and fresh food. The packaging technology and packaging materials of canned food have attracted much attention because sealing sterilization meets the requirements of commercial sterility and does not need to add preservatives.

Advantages of canned goods the soft can is light in quality, small in size, easy to open, and durable in storage.

In recent years, the pressitin tin can has become a leader in the canning industry.

It has the following advantages:

1 No welding, reduce lead pollution.

2 Manual hand seal bottom to save time, simple operation.

3 Low energy consumption and few materials.

4 Small and portable.

100ml Pressitins are the perfect size for storing 3.5g of dried flower. To seal the tin you simply push the base plate (bottom of the tin) into the body of the can firmly until you feel it click into place. To open, you pull the ring pull and reseal the can by using the plastic cap provided with the Pressitin. No tools are needed for these Tins.

Product information:

Material	tinplate
Color	Silver or gold inside
Type of lids	Bottom press bottom and PP lid in black or clear color
Usage	tea \ flower buds\nuts ext
Package	390 pcs of can body in a carton,1500 pcs of can lid in a carton

Size table:(If the total amount is up to 3000pc, the height of the tin cans is adjustable.)


Model NO. of tin cans	Material	Capacity	Thickness	Size
628#	Tinplate	70ml	0.18-0.22mm	Diameter 65mm * Height 28mm
636# (outer golden/inner white coating)	Aluminum	80ml	0.18-0.22mm	Diameter 63.5mm * Height 36mm
636# (outer golden/ inner original silver coating)	Aluminum	80ml	0.18-0.22mm	Diameter 63.5mm * Height 36mm
634#	Aluminum	90ml	0.18-0.22mm	Diameter 65mm * Height 34mm
634#	Tinplate	90ml	0.18-0.22mm	Diameter 65mm * Height 34mm
640#	Tinplate	100ml	0.18-0.22mm	Diameter 65mm * Height 40mm
728#	Aluminum	90ml	0.18-0.22mm	Diameter 73mm * Height 28mm
728#	Tinplate	90ml	0.18-0.22mm	Diameter 73mm * Height 28mm
730#	Aluminum	95ml	0.18-0.22mm	Diameter 73mm * Height 30mm
730#	Tinplate	92ml	0.18-0.22mm	Diameter 73mm * Height 30mm
732#	Aluminum	100ml	0.18-0.22mm	Diameter 73mm * Height 32mm
732#	Tinplate	100ml	0.18-0.22mm	Diameter 73mm * Height 32mm
840#	Aluminum	170ml	0.18-0.22mm	Diameter 83mm * Height 40mm
840#	Tinplate	170ml	0.18-0.22mm	Diameter 83mm * Height 40mm
842#	Aluminum	180ml	0.18-0.22mm	Diameter 83mm * Height 42mm
842#	Tinplate	180ml	0.18-0.22mm	Diameter 83mm * Height 44mm
846# (Laminated Steel technology)	Tinplate	210ml	0.18-0.22mm	Diameter 83mm * Height 46mm
846# (Enameled tinplate technology)	Tinplate	210ml	0.18-0.22mm	Diameter 83mm * Height 46mm
936# (bowl-shape)	Aluminum	150ml	0.18-0.22mm	Top Diameter 99mm * Height 36mm
936# (bowl-shape)	Tinplate	150ml	0.18-0.22mm	Top Diameter 99mm * Height 36mm
937# (bowl-shape)	Aluminum	154ml	0.18-0.22mm	Top Diameter 99mm * Height 37mm
937# (bowl-shape)	Tinplate	154ml	0.18-0.22mm	Top Diameter 99mm * Height 37mm
938# (bowl-shape)	Aluminum	157ml	0.18-0.22mm	Top Diameter 99mm * Height 38mm
938# (bowl-shape)	Tinplate	157ml	0.18-0.22mm	Top Diameter 99mm * Height 38mm
939# (bowl-shape)	Aluminum	161ml	0.18-0.22mm	Top Diameter 99mm * Height 39mm
939# (bowl-shape)	Tinplate	161ml	0.18-0.22mm	Top Diameter 99mm * Height 39mm
940# (bowl-shape)	Aluminum	165ml	0.18-0.22mm	Top Diameter 99mm * Height 40mm
940# (bowl-shape)	Tinplate	165ml	0.18-0.22mm	Top Diameter 99mm * Height 40mm

Welcome your inquiry to Qiming Packaging Company. Thanks for your reading.

Free sample

Send Inquiry

What are the different types of IBC connectors?

8th November 2023/in Qiming Product Knowledge Base/by qiming packaging group

To choose the correct IBC connectors for your IBC tank, you will need to know:

The thread type and gender (i.e. male or female) of the outlet of your IBC tank.

The type and gender of connection you need to attach to your IBC tank

Qiming packaging company stocks a massive range of quality IBC fittings for just about any purpose. We’ve created this guide to help you quickly find and purchase the IBC fittings you need.

Thread types for the IBC adapter inlet

Each IBC tank will have an outlet valve, and any IBC fitting will need the matching thread type, defined as:

S60x6

S75x6

M80x3

S100x8

What is a BSP connection?

BSP (British Standard Pipe) is a technical standard for screw threads and it is a very common type of thread. Many of the connections and pipes used to link two or more IBCs together will use BSP threads, as will many taps. It’s a widely used international standard, which is why our IBC to BSP adapters come in a range of sizes, e.g. from 1/2 inch up to 2 inches.

So how do you find out the outlet of your IBC container?

IBC containers can have different types of fittings. The most standard fitting is the IBC threads or buttress threads, it is a larger courser thread and they come in a few sizes but your IBC container could also have a BSP thread or a DIN thread.

How to find the correct thread on your IBC tank?

Measure the outside diameter of the IBC opening.

Measure the distance between the thread from peak to peak (on the thread).

You will find one of the following threads:

IBC valve: S60 x 6 Buttress /DN50

Diameter outlet: 60mm

Thread tape distance: 6mm

IBC valve: S100 x 8 Buttress

Diameter outlet: 100mm

Thread tape distance: 8mm

If you are still left with any questions, please contact our team(Qiming packaging) and tell us your requirements. We will help you find the right IBC adapter.

Free sample

Inquiry

flange protectors

Plastic End Cover For PCD of Flange End

25th October 2023/in Qiming Product Knowledge Base/by qiming packaging group

Qiming packaging Plastic End Cover For PCD of Flange End adopts LDPE material. Complete sizes are available. It has many good features: durability, good ductility, high temperature, and low-temperature resistance, The feature of Internal plug protection: The plug-in plastic pipe end cap is a form of protection that can also make the pipe inside the formation of a closed space, conducive to the protection of pipe. Plastic End Cover For PCD of Flange End.

Choose from thousands of sizes Flange Cover your choice of colors. The unique dip molding process allows hundreds of design possibilities by varying wall thickness, hardness, inside length, and surface texture.

How to choose a good pipe cap:

1, look – the appearance of unqualified products will affect the visual perception of consumers. At the same time, the appearance is a reflection of the internal quality. The appearance of unqualified products has poor internal quality and affects the user experience. If the product’s appearance is rough, has forming defects, has color impurities and printing quality is poor, it is better not to choose.

2, Smell — it is better not to use a product that has odors. The pungent odor will harm the human respiratory system. The main reason plastic products have odors is the use of recycled materials and inferior additives.

Qiming PACKAGING Flanges covers — Plastic End Cover For PCD of Flange End

3, Touch – In order to catch the eye of consumers, the color of the product is very bright. But how to check if the product is good quality or not? For example, if you check a product in a dark color or the pigment in the process of production, you can just check it by yourself. Pour a little vinegar on the wool ball and wipe the face 100 times repeatedly again. If the wool ball is dyed with color, it shows that his product is unqualified.

If you would like to know more about our pipe end caps or flange caps, you could also contact us by email or call us to know more.

Qiming Packaging Pack Your More Safety Life!

free sample

send inquiry

What are the benefits of plastic trays?

28th September 2023/in Qiming Product Knowledge Base/by qiming packaging group

With the improvement of people’s living standards, people are no longer satisfied with simply tasting fresh fruits and vegetables, and the production techniques of different foods are also constantly updated and iterated. In recent years, dried fruits, nuts, dried vegetables, and other products have gradually become popular. Dried fruits and vegetables have a completely different taste than fresh fruits and vegetables. More and more young people tend to buy dried fruits and other foods. The indispensable equipment in the process of air-drying fruits and vegetables is a dryer and plastic drying trays. What are the advantages of plastic trays?

Food grade material

Plastic trays are made of 100% food-grade materials and are safe for food contact. They are very advantageous in the fields of food drying, freezing and storage.

Easy to maintain
Plastic trays do not need to be treated to prevent fungal or mold growth or insect infestation; making the plastic trays themselves very easy to maintain and maintain, and easy to store for long periods of time.
Quick cleaning
Plastic trays can be easily cleaned using a variety of methods, such as hot water washing, steam, or chemical solutions.
Safety
The trays are one-shot injection molded, the molding is smooth and free of burrs and debris, and coupled with their lightweight nature, plastic trays are easier and safer to move and transport.
Saving costs
It is 30% lighter than metal and wooden trays, using plastic trays is a smart choice when it comes to shipping as it saves a lot on shipping costs.
Durable and strong
With a service life of up to ten years, the sturdy and durable plastic trays show little breakage; greatly reducing the cost of repairing or replacing them.
Recyclable
Even after years of use, plastic trays can be recycled, thus retaining their value. Produced again as new trays, they can be used again for many years and are an environmentally friendly and sustainable solution.

Qiming Packaging plastic drying trays are very popular in the markets of America and Australia, and many clients have purchased plastic trays for many years. If you are in this field and have these requirements as well, please don’t hesitate to contact us! Your inquiry is welcome.

FREE SAMPLE

SEND INQUIRY

square buckets

Plastic buckets for each use case

16th August 2023/in Qiming Product Knowledge Base/by qiming packaging group

The plastic buckets with handles are typically a watertight, vertical cylinder or truncated cone or square, with an open top and a flat bottom, attached to a semicircular carrying handle(metal handle with a plastic grip or plastic handle).

It is a shipping container. The plastic buckets with handles are an economical way to store products. Use the plastic buckets to mix paint, wash your car, carry supplies, and complete many other household and work-site tasks. We can mix fertilizer in them, bring fish home using the buckets and store tea in the buckets.

qiming packaging rectangle buckets — rectangle buckets

Features of plastic buckets:

-100% PE or PP material

-Good sealing

-BPA-free (except black)

-Test report according to the standard of the FDA for food-grade material

-These buckets & lids are not compatible with any other products

-Lids sold separately

-There are two types of lids: easy-open lids and lids with sealing strips (tear-pull strips).

-Optional size: 100ml-25L, both can be selected

-Colors can be selected, red, blue, white, black, and transparent, and can be customized according to MOQ.

-Production process: one-shot injection molding, smooth surface, no splicing and seams, no burrs, durable, long service life

-The ribs are designed on the sides and bottom to reinforce the barrel body and enhance its load-bearing capacity. The barrel body is strong and wear-resistant.

rally, the thickness of the barrel is less than 5L, the thickness is about 1.8mm, 5L to 15L, and the thickness is about 2mm, 15L. Above 20L, the thickness is about 2.2mm

-Drop resistance and impact resistance can be stacked to 4 meters high after sealing, can be nested after opening the lid, save storage space, inform customers that all barrels will be carried out after production, drop test, pressure test, leak test, And load-bearing tests.

-Printable: screen printing, thermal transfer, IML

The plastic buckets have many other usages as well.

1. DIY Home Gardens

Growing flowers;

Growing Rice;

Grow vegetables mushrooms and fruits;

2. Soap-Making Basin storage

3. Portable Shower

If you would like to know more about our plastic buckets, you could also contact us by email or call us to know more. (mail@qiminggroup.com)

Company email: mail@qiminggroup.com

Qiming Packaging Pace Your More Safety Life!

Free sample

Send inquiry

Diameter 55mm 60mm 70mm Vented Caps Closure

Unraveling the mystery of the various types of plastic engine oil bottle caps

14th July 2023/in Qiming Product Knowledge Base/by qiming packaging group

1L 2L 4L 5L 6L plastic engine oil bottle caps china manufacturer, The caps are 100% tested by the automatic sealing machine. This plastic jerry can cap is made from high-quality HDPE (High-Density Polyethylene). It is ideal for packaging and sealing motor oil.

Our advantage:

fast delivery

small or trial order

refund within 7 days

Customized service

free samples

Product Description:

Product name	plastic engine oil bottle caps
Material	New PE
Dimensions	25mm,29mm,30mm,36mm,38mm,39mm,43mm,46mm,48mm,49mm,55mm
Application	Gasoline, Engine oil, Motor oil, Lubricant,Paint, ink,white coating or other chemicals
Advantage	Non-spill,easy spout,anti-corrosion,anti-leakage, good sealing
Trade Term	EXW, FOB and CIF
Payment terms	30% Deposit balance before shipment
Freight	Air,Sea,Express(door to door shipping,DHL,EMS,FEDEX,UPS)
Certification	ISO9001 SGS
Packing	Custom cartons, Standard export cartons and/or Pallets, Bags,film
Production Delivery Time	25 days after receiving down deposit
Color	Red,white, black, blue, yellow,green, orange etc all colors can be available
Type	Plastic screw cap,easy spout cap, pull ring cap, pull up cap, pull out cap,push pull cap,non spill cap, stretch cap

Inner diameter 55mm, vented and non-venetd two types. High quality with strong plastic material. Different choices for you.

Tangshan Qiming Trade Co., Ltd.

known as “Qiming Packaging”, Qiming Packaging is a professional engaged in the research, development, sale and service of packaging and printing products.

Our factory owns professional injection equipment and blister equipment, and has tooled 108 kinds of molds to cater to different customer preferences.

Q1. What is your terms of packing?

A: Generally, we pack our goods in strong pallets. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.

Q2. What is your terms of payment?

A: In normal,T/T 30% as deposit, and 70% against BL copy by email . We’ll show you the photos of the products and packages before you pay the balance. 100 % TT also accepted. After several cooprations ,OA,OD also OK. For first time , massive order LC at sight ,time LC also accepted.

Q3. What is your terms of delivery?

A: EXW, FOB, CFR, CIF, DDU.

Q4. How about your delivery time?

A: Generally, it will take 10 to 30 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

Q5. Can you produce according to the samples?

A: Yes, we can produce by your samples or technical drawings.

Q6. What is your sample policy?

A: You just bear the freight of sample, we can offer the sample free.

Q7. Do you test all your goods before delivery?

A: Yes, we have 100% test before delivery.

Q8: How do you make our business long-term and good relationship?

A:1. We keep good quality and competitive price to ensure our customers benefit; 2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from in the world.

If you are interested in us, contact us now to get more detail!

Mobile/Whatsapp: 86-15324051286

Company email: mail@qiminggroup

free sample

Plain Drum Seals (With & Without PVC liner)

16th June 2023/in Qiming Product Knowledge Base/by qiming packaging group

Drum seals are also called: Barrel caps, barrel caps seals, barrel seals, bung seals, drum caps, drum cap seals, fuel drum seals, metal drum caps, steel drum caps, drum cap seal supplier manufacturers, and fuel drum seal caps.

Specifications of our Steel (metal) Cap Seals :

– Made from tinplate & tin-free steel of 0.22-0.36mm thickness for optimum sealing result.

– Top surface is white, colored, or with your company logo.

– Inner surface is lacquered to avoid corrosion.

– Inner edge has a PVC gasket for better contact with the flange.

– Ears and scored lines ensure that the cap seal has to be destroyed before removal.

Advantages:

Metal Cap Seal for 210 liter / 55 gallon Drums :

— 2″ (50 mm) plug-cap seal outer diameter 70 mm

— 3/4″ (19mm) plug-cap seal outer diameter 35 mm

Metal Barrel Seal tinplate drum cap seals for 200 liter steel drum

Custom Cap Seals :

— Any other size as per your requirement.

— Get the cap seals with your company logo and name printed.

Low MOQ:

–The MOQ is 1000 sets if you want logo printing.

–Samples are for free.

Packaing&Shipping:

–Strong Carton+woven bags

–Fast delivery

Qiming group is a manufacturer and exporter of a wide range of Drum cap seals. These are manufactured as per the specification of the client.

We are manufacturing variants of drum cap seals one is printed and the other is plain.We can make Alibaba assurance orders with a quick reply in 1 hour. With us, your money is safe, your business is safe.

We export worldwide to the following countries :

USA, Australia, Singapore, Europe, United Kingdom, Saudi Arabia, Indonesia, Malaysia, Vietnam, Ireland, Spain, Guatemala, Brazil, Mexico, Germany, Italy, New Zealand, Myanmar, Bolivia, Hungary, Costa Rica, Japan, South Korea, Philippines, Nicaragua, Bulgaria, Egypt, Srilanka, Panama, Bahrain, France, Kenya, Zambia, Argentina, Greenland, Switzerland, Lebanon, Kuwait, Uganda, South Africa, Jordan, Latvia, Botswana, Ghana, Nigeria, Chile, Poland, Czech Republic, UAE, Turkey, Seychelles, Mauritius, American Samoa, Tanzania, Greece, Russia, Papua New Guinea, Estonia, Thailand, Romania, Canada, Denmark, Peru, Cook Islands, Sudan, Bangladesh, Austria, Slovenia, Nigeria, Gambia, Cyprus, Madagascar, Israel, Uruguay. Ecuador, Colombia, Puerto Rico, Suriname, Belgium, Lithuania, Croatia, Azerbaijan, Iraq, Ukraine, Fiji, Qatar, Malawi, Oman, Mozambique, Netherlands, China, Morocco, Malta, and Vanuatu.

Tangshan Qiming Trade Co., Ltd.

known as “Qiming Packaging”, Qiming Packaging is a professional engaged in the research, development, sale, and service of packaging and printing products.

Our factory owns professional injection equipment and blister equipment and has tooled 108 kinds of molds to cater to different customer preferences.

If you do not find the products you want, you can click our another website: www.qimingpackaging.com

Mobile/Whatsapp: 86-15324051286

Company email: mail@qiminggroup.com

Free sample

inquiry

Clear PP Plastic Round Snap-Lock Containers

25th May 2023/in Qiming Product Knowledge Base/by qiming packaging group

The Plastic Round Containers that are common in life are generally made of PP. PP plastic round containers are mostly used for the storage and transportation of various liquid and solid products. Corrosion-resistant product packaging. Some are used for industrial purposes, so the purity of raw materials varies; some are food-grade and need to be used in the food packaging industry, so the raw materials must be 100% PP raw materials, and must not contain any impurities so that they can be safely touched food.

In addition, PP Plastic Round Containers have the following advantages:

Beautiful and clean shape, smooth inside and outside, no welding and seamless, lightweight, good strength, impact resistance, corrosion resistance, non-toxic and tasteless, high-temperature resistance, convenient storage, and transportation.

2.The PP round container body is integrally molded at one time, seamless and non-bonded, with excellent stretch resistance and impact resistance. The service life of the product can be as long as 10 years. Under normal transportation and storage conditions, the shelf life is long.

3. Product appearance design and product size can be customized according to customer needs.

4.For food packaging containers, the technical parameters of the products are strictly in accordance with the national food safety standards. The plastic barrels in contact with food have good sealing performance and are equipped with snap-Lock and anti-theft buckles, which can meet the multiple needs of customers.

5. During the storage process, they can be stacked in stacks, which greatly saves space and materials.

6. The transparent PP drum has the same advantages as the PP non-transparent drum. In addition, its high-transparent shape can help users see the products in the drum clearly, and can also help users observe the remaining product in the drum.

Qiming food-grade clear PP plastic round containers are widely used and have various sizes. If you are interested in our products, please visit our website(www.qiminggroup.com) for more information about this product, or contact our customer service by email (mail@qiminggroup.com), and we will reply as soon as possible you.

Free sample

inquiry

Metal Bottle Caps, Jar Lids & Closures

23rd April 2023/in Qiming Product Knowledge Base/by qiming packaging group

Qiming Metal Bottle Caps, Jar Lids & Closures include various sizes and colors, which are made of metal tinplate materials. Metal twist-off caps are widely used for sealing glass jar canned food, they are produced based on factory standards. We also provide customized services, including logo and picture printing. If you are interested in our caps, you can contact us to get more details.

Food Grade Full Range Of Twist Off Metal Lids For Jar Here. Are you a manufacturer of canned food? If so, please do not hesitate to choose our container lids of fruit, sardine, peanut, meat sauce, and so on, because they are FDA-approved in various colors and fashion styles, which will do a great help in your marketing at home and abroad.

Qiming Twist Off Metal Lid is a full range of varieties, complete specifications, and more. Almost any color, designed hole, or logo can be custom-made. FREE SAMPLES Available.

Item name: Food Grade Tinplate Twist-Off Caps

Material: tinplate, used as food lacquered surface tin, aluminum, iron, brass or stainless steel, etc.

Color: Gold, White, black, antique brass, silver, Chromium Iron, gunmetal, copper, or on your request.

Size: Customized size(the following table is our general one for your reference )

Produce type: OEM/ODM welcomed

Processing: Stamping, die-casting, electroplating, etching, printing, enamel & epoxy, Inspecting, Quality Control Again, Packing

Artworks: Technical drawings & 3D drawings for approval.

Logo type: Engrave, embossed, 3D raise, enamel, epoxy, laser, printing, or painting.

Finishing: Nickel-free & lead-free plating, laser engraving, silk-screened or enamel covered with clear epoxy dome.

Usage: Bottle lids, Fashion accessories, container lids of fruit, sardine, peanut, meat sauce, and so on.

Features: Good sealing, safety membrane (closure control).

Our advantages of Qiming Twist-Off Metal Lids are a full range of varieties, complete specifications, and more. Almost any color, designed holes, and logo can be custom-made.

Size and type

qiming twist off lids — Metal Bottle Caps

If you are interested in us, contact us now to get more detail!

Mobile/Whatsapp: 86-15324051286

Company email: mail@qiminggroup.com

Free sample

Chat on line

Are IBC tanks safe?

Pressitin Tuna Tin Cans Wholesale

What are the different types of IBC connectors?

Plastic End Cover For PCD of Flange End

What are the benefits of plastic trays?

Plastic buckets for each use case

Unraveling the mystery of the various types of plastic engine oil bottle caps

Plain Drum Seals (With & Without PVC liner)

Advantages:

Clear PP Plastic Round Snap-Lock Containers

Metal Bottle Caps, Jar Lids & Closures

Contact Info

Latest Qiming Packaging Blogs

Customer Center

TUV & Alibaba Certificated Video

Main Product Categories

Archive for year: 2023

Advantages:

Contact Info

Latest Qiming Packaging Blogs

Customer Center

TUV & Alibaba Certificated Video

Main Product Categories