pvc pipe plastic end cap

PVC Pipe Plastic End Cap

/in , /by

1. What is pvc pipe plastic end cap?

PVC Pipe Plastic End Cap
pvc pipe plastic end cap

PVC is short for Polyvinylchloride, the main ingredient is polyvinyl chloride, and other ingredients are added to enhance its heat resistance, toughness, and ductility of a material. The topmost layer of this surface film is a lacquer, the main component in the middle is polyvinyl chloride, and the bottommost layer is a backcourt adhesive.

It is a popular and widely used synthetic material in the world today. It has the second-highest global use among all synthetic materials. According to statistics, in 1995 alone, PVC production in Europe was around 5 million tons, while its consumption was 5.3 million tons. In Germany, the production and consumption of a PVC average of 1.4 million tonnes.

PVC can be divided into soft PVC and hard PVC, hard PVC accounts for about 2/3 of the market, soft PVC accounts for 1/3, soft PVC is generally used for floor, ceiling, and leather surface layer; hard PVC does not contain a plasticizer, quite easy to form, good physical properties, so it has a great value for development and application; PVC pipe has been praised by the engineering community for its light-weight, corrosion resistance, high compressive strength, safety and convenience characteristics. In recent years, the development of domestic and foreign PVC pipes has been very rapid.

2. What do I need to be aware of during the installation of PVC pipes?

1, in order to ensure the safety and cleanliness of PVC pipe, the pipe should be placed on the top with the use of brackets, to ensure that the pipe is not lying around and be stepped on by the crowd, the pipe can also be used cleanly, but also to prevent the pipe in the sludge residue.

2, before installation, the construction pipeline layout should be checked clearly, not only neat but also strong structure, whether smooth.

3, when installing, put the pipe lightly, to avoid damage during handling, and pay attention to the stone or sludge to stay in the pipe.

After installation, we have to test the pressure for a period of time, and then check each interface without water leakage, and replace it immediately if found.

From the above, we know the precautions for pipe installation structure, what is the prerequisite to ensure smooth construction? Yes, proper storage and maintenance. This requires a protective protector –PVC pipe plastic end cap.

3. PVC Pipe Plastic End Cap

3.1 PVC Pipe Plastic End Cap Types

plastic cap for steel pipe end protection
plastic cap for steel pipe end protection

In terms of appearance, there are two kinds of PVC pipe plastic end caps, they are caps and plugs; in terms of materials on the market, there are two kinds — LDPE and PVC.

3.2 PVC Pipe Plastic End Cap Comparison(PVC&LDPE)

Comparison of LDPE and PVC Property Values
LDPEMATERIALPVC
0.1WATER ABSORPTION RATING0
1400TENSILE STRENGTH7500
30000FLEXURAL MODULUS481000
—COEFFICIENT OF LINEAR THERMAL EXPANSION6.1
—DIELECTRIC STRENGTH544
Material   Applications
 Film products, such as agricultural films, packaging films such as confectionery, vegetables, frozen food packaging, etc; Construction film, general industrial packaging film and food bags Plastic injection products, such as small containers, lids, daily use products, plastic flowers, injection back molding, stretching and blow molding containers.Medical apparatus, pharmaceutical, and food packaging materials, extruded pipes and plates, wire and cable wrapping, profile, thermoforming and other products; blow-molded hollow molding products, such as food containers such as dairy products and jams, drugs, cosmetics, chemical products containers, tanks and cansPolyvinyl chloride profile Profile, Polyvinylchloride pipePolyvinyl chloride film: can be cut and heat laminated to process bags, raincoats, tablecloths, curtains, inflatable toys, etc. Hard pipe, shaped pipe, corrugated pipe, used as a downpipe, drinking pipe, wire casing or stair rail. Storage tanks, ducts, and containers
Advantage and Disadvantage
LDPE has good flexibility, elongation, transparency, cold resistance, and processability; its chemical stability is good, can resist acid, alkali and salt aqueous solutions; good electrical insulation and permeability; low water absorption; easy combustion. Soft nature, good elongation, electrical insulation, chemical stability, processing properties and low-temperature resistance (-70 ℃).  Its mechanical strength, moisture barrier, air barrier, and solvent resistance are poor. It is susceptible to discoloration by decomposition in sunlight or high temperatures.The main advantage of PVC material is: the material is relatively light, waterproof and moisture-proof, unlike the plastic we see every day, PVC also has the characteristics of flame retardant insulation.   The disadvantages of PVC are poor resistance to high temperatures and easy deformation when working in hot environments. The long-term use temperature of most PVC products should not exceed 55°C. It is a relatively unstable polymer, which also degrades under the action of light and heat. Dioxin acid gases are released at high temperatures.

3.3 Qiming Packaging PVC Pipe Plastic End Cap(LDPE)

Combined with the above table we know that the deficiencies of LDPE are lower mechanical strength than HDPE, poor impermeability, heat resistance and resistance to sunlight aging, and the susceptibility to aging decomposition and discoloration under sunlight or high temperatures, resulting in reduced performance, but our Qiming Packaging LDPE has added antioxidants and UV absorbers to improve its deficiencies when it is made into plastic rolls. Therefore, Qiming Packaging pipe plastic end caps have a certain anti-aging and UV resistant function.

If there are any shortcomings in the article, please feel free to reply to the email for correction.   mail@qiminggroup.com/packaging@qimingpackaging.com.

If you are interested in us, contact us now to get more detail! If you do not find the products you want, you can click another website: www.qimingpackaging.com. Or you can send the mail: mail@qiminggroup.com

Plastic End Cap For Copper Pipe

/in , /by

A copper tube is also called a red copper tube. A kind of non-ferrous metal pipe is pressed and drawn seamless pipes. Plastic end cap for copper pipe has the characteristics of good electrical conductivity and thermal conductivity, the main materials of conductive accessories and heat dissipation accessories of electronic products, and have become the first choice for modern contractors to install tap water pipes, heating and cooling pipes in all residential commercial houses.

Copper is safe. No leakage, no combustion, no toxic gas, and corrosion resistance.

The storage of copper pipes usually needs to be protected against dust. The plastic end cap for a copper pipe is an important tool to protect the cleanliness of the pipes.

The plastic end cap for the copper pipe is LDPE material. Complete sizes are available. It has many good features: durable, good ductility, high temperature, and low-temperature resistance, The feature of Internal plug protection: The plug-in plastic pipe end cap is a form of protection which can also make the pipe inside the formation of a closed space, conducive to the protection of pipe. Unlike the external type, it is not possible to effectively protect the outer wall of the pipe end. Because this form of protection is conducive to the lifting of the pipe, it is also one of the more common forms.

plastic pipe end caps end covers (1)

Let’s introduce some details about the plastic end cap for copper pipe to you:

This unique finned design enables each plug to tight fit a large range of IDs of every Nominal Pipe Size up to 48 inch OD.

Push-Fit design allows easy application of plug to pipes racked on the yard.

It provides excellent protection from damage, dirt, moisture, and corrosion during storage and transportation.

Size: Φ6mm to Φ1219mm

Material: LDPE, low-density polyethylene

Standard Color: Blue

Custom-made: Resistant to temperatures from -50 degrees C to +60 degrees C.UV-stabilised

If you would like to know more about our food tin cans, you could also contact us by email or calling us to know more. (mail@qiminggroup.com)

Qiming Packaging Pack Your More Safety Life!

pipe plastic end cap manufacturer

Plastic Pipe Cap End Protectors

/in , /by

Qiming packaging plastic pipe cap end protectors adopt LDPE material. Complete sizes are available. It has many good features: durable, good ductility, high temperature, and low-temperature resistance, The feature of Internal plug protection: The plug-in plastic pipe end cap is a form of protection which can also make the pipe inside the formation of a closed space, conducive to the protection of pipe. Unlike the external type, it is not possible to effectively protect the outer wall of the pipe end. Because this form of protection is conducive to the lifting of the pipe, it is also one of the more common forms. If you are interested in the products, please feel free to contact us. Free Sample for you to check.

Let me introduce the most popular plastic pipe cap end protectors to you:

This unique finned design enables each plug to tight fit a large range of IDs of every Nominal Pipe Size up to 48 inch OD.

Push-Fit design allows easy application of plug to pipes racked on the yard.

It provides excellent protection from damage, dirt, moisture, and corrosion during storage and transportation.

Size: Φ6mm to Φ1219mm

Material: LDPE, low-density polyethylene

Standard Color: Blue

Custom-made: Resistant to temperatures from -50 degrees C to +60 degrees C.UV-stabilised

Qiming Packaging can offer featured service:

*Accept Trial Order

*Low MOQ

*Free Sample

*Non-Disclosure Agreement Quality & Refund Agreement

* Price for reasonable/Result for win-win

If you would like to know more about our food tin cans, you could also contact us by email or calling us to know more. (mail@qiminggroup.com)

Qiming Packaging Pack Your More Safety Life!

pipe plastic end cap manufacturer

Pipe Plastic End Cap Manufacturer

/in , /by

Qiming packaging Pipe Plastic End Cap Manufacturer for round tubing adopt LDPE (Low-Density Polyethylene) material, have many good features: durable, temperature resistance, good ductility, dustproof. Full sizes are available. And pipe Pipe Plastic End Cap is a kind of protective product on the steel pipe which played a protective role. The specific protection of the pipe includes a seamless steel pipe and welded steel pipe, gas pipe, and other round pipes.

The feature of External button type: Not only protect the inside of the steel pipe to form a closed space inside the pipe but also completely protect the steel pipe end. This form is more common in the steel pipe transport and storage process and also has played a very good effect. If you are interested in our plastic pipe end caps, please feel free to contact us, and pipe plugs and flange protectors are all available. Email: info@qimingpackaging.com

Let me introduce the most popular Pipe Plastic End Cap Manufacturer to you:

One-piece construction. It is injection-molded.Up to 78″.Internal ribs provide a tight fit and release pressure build-up.

Size: Ф6mm to Ф1981.2mm

Material: LDPE, low-density polyethylene

Standard Color: Blue

Custom-made: Resistant to temperatures from -50 degrees C to +60 degrees C. UV-stabilised

Qiming Packaging can offer featured service:

*Accept Trial Order

*Low MOQ

*Free Sample

*Non-Disclosure Agreement Quality & Refund Agreement

* Price for reasonable/Result for win-win

If you would like to know more about our food tin cans, you could also contact us by email or calling us to know more. (mail@qiminggroup.com)

Qiming Packaging Pack Your More Safety Life!

Pipe End Cap Plastic

/in , /by

Qiming packaging pipe end cap plastic adopts LDPE material. Complete sizes are available. It has many good features: durable, good ductility, high temperature, and low-temperature resistance, The feature of Internal plug protection: The plug-in plastic pipe end cap is a form of protection which can also make the pipe inside the formation of a closed space, conducive to the protection of pipe.

plastic pipe end caps end plugs

Unlike the external type, it is not possible to effectively protect the outer wall of the pipe end. Because this form of protection is conducive to the lifting of the pipe, it is also one of the more common forms.

Let me introduce the most popular pipe end cap plastic to you:

One-piece construction. It is injection-molded. Up to 78″. Internal ribs provide a tight fit and release pressure build-up.

Size: Ф6mm to Ф1981.2mm

Material: LDPE, low-density polyethylene

Standard Color: Blue

Custom-made: Resistant to temperatures from -50 degrees C to +60 degrees C.UV-stabilised

The steel pipe guard cap has different classification standards in the use, according to certain ways and methods of use and promotion. The flexible four-eye seal is easy to use not crack or break, even in severe weather, moisture, and chemical applications. It is suitable for all valve/flange ends that require dust, water, and transportation protection (or friction).

If you would like to know more about our food tin cans, you could also contact us by email or calling us to know more. (mail@qiminggroup.com)

Qiming Packaging Pack Your More Safety Life!

Pressitin body and base

/in , /by

In recent years, the pressitin body and base have become a leader in the canning industry.

customized labels and stickers pressitin cans for sale

Because canned food can better preserve the color, aroma, taste and nutritional value of natural and fresh food. The packaging technology and packaging materials of canned food have attracted much attention due to the fact that the sealing sterilization meets the requirements of commercial sterility and does not need to add preservatives.

It consists of three parts: can body, can base(we call it bottom normally) and plastic top cap. If you want your own logo, then we can provide different stickers.

About the size,now we have size 66*27 mm(diameter*height),66*19 mm,66*35 mm,66*40 mm,66*60 mm,73*20 mm,73*23 mm,73*45 mm in stock.

There are a lot of advantages of our pressitin body and base:

1.Smooth inside and outside surfaces

2. Light weight, high strength, using hard and durable material: tinplate or Tin-free Steel.

3. Smooth inside bottom without welding lines by using deep draw technique.

4. Easy to pour completely.

5.There are many hooks in the bottom.

6.It’s easy to put it in the body,and can’t be take off easily.

7.At last no need the machine seal,just press is okay.

The production process:

production process

iron material-printing-cutting-stamping-assembly-packaging-step by step.

1)Iron:

Generally, after confirming the order, we are going to purchase the iron material, test the quality

2)Printing:

What you should pay attention to in the printing process is to see whether the printing color is keeping up with the model, whether the set is accurate and if there are stain or scratches, etc.

3)Cutting:

After finished the printing, you can cut the material according to the row of cutting beds. When cutting the mattress, pay attention to the operator to see if they cut according to the blade line and whether the length is uniform. Whether the workers scratch each other during unloading, etc., the quality should be checked at the initial operating station.

4)Stamping:

Pressing iron pieces into shapes on a punching machine is the most important work of making a can.

5)Assembly

After the production is completed, the packaging department is responsible for cleaning and assembly, putting in plastic bags and packing. This step is the final work of the production and it is very important, so it must be cleaned before packaging, and then packaged according to the packaging rule. What should be paid attention to in the packaging process is to minimize the inflow of defective products into the finished product, and the quantity of packing must be accurate.

Welcome to your inquiry, please contact us at any time if you are interested in it!

Empty tuna cans with lids

/in , /by

Are you still looking for the empty tuna cans with lids? You need to know more about the tuna cans.

We have two types of tin cans, one is a tin can with lid and another is a tin can with bottom and top plastic cover. They are not the same and have different applications.

empty tuna cans wholesale canada
labels stickers pressitin tin cans manufacturers

The left one is the tuna can with top lid:

They are usually used for packaging pet canned food, tuna, fish and some other wet food, It can’t be sealed by itself, but need a sealing machine, we also call it 2 pieces can once be sealed, no leak, keep the food 100 % fresh.

The right one is the press it can:

This type of tin can are always used for packaging some dry food or some other dry, like the weed, the dry flower, dry fruit, the Medical marijuana, NO liquid, because it’s not 100% sealing, and you only need to seal it by hand to push the bottom into the can body, it can be hooked.

Besides, it has a plastic cap on the top, black or clear white.

Now it has been a very hot product, very popular around people because of its good features and smooth and beautiful appearance.

There are a lot of advantages to our empty tuna cans with lids:

1.Smooth inside and outside surfaces

2. Light-weight, high strength, using hard and durable material: tinplate or Tin-free Steel.

3. Smooth inside bottom without welding lines by using deep draw technique.

4. Easy to pour completely.

5. There are many hooks at the bottom.

6. It’s easy to put it in the body, and can’t be taken off easily.

7. At last no need the machine seal, just press is okay.

If you are interested in us, contact us now to get more detail! If you do not find the products you want, you can click another website: www.qimingpackaging.com. Or you can send the mail: mail@qiminggroup.com

Empty Tuna Cans For Weed

/in , /by

Q: What do your empty tuna cans for weed can pack?

A: They can be used for packaging some dry food,like cookies, dry fish, solid food, dry flower or weed.

100ml Pressitin can are the perfect size for storing 3.5g of dried flower. To seal the tin you simply push the base plate (bottom of the tin) into the body of the can firmly until you feel it click into place. To open, you pull the ring pull and can reseal the can by using the plastic cap provided with the Pressitin.

Now we have size 66*27 mm(diameter*height),66*19 mm,66*35 mm,66*40 mm,66*60 mm,73*20 mm,73*23 mm,73*45 mm in stock.

Something you should know about Qiming Packaging Empty Tuna Cans For Weed:

Colour: Silver

Packaging material: Tinplate

Closure style: Push-In Base & Pull Ring Opening

Suitable for: Gifts, Dry Products, Limited-Edition Packaging

Product options:3 parts

Suitable as packaging for dry products, the empty tuna cans are often used for creating novelty, limited edition products, gifts, promotional items or in marketing campaigns.

The empty tuna cans are coated in a food-safe lacquer, making it great for sweets and other confectionery.

The empty tuna cans’ plastic top cap is an optional extra and fits all sizes of the empty tuna cans. The cap is available in either black or clear white.

Are you still have many questions to ask?

Q1: What material do you use for the cannabis tins?

A: Tinplate

Q2: What is tinplate?

A: Tinplate, also called tin-plated iron, is a common name for electroplated tin steel sheet. The English abbreviation is SPTE, which refers to a cold-rolled low-carbon steel sheet or steel strip coated with commercially pure tin on both sides. Tin is mainly used to prevent corrosion and rust. It combines the strength and formability of steel with the corrosion resistance, solderability, and aesthetic appearance of steel in one material. It has the characteristics of corrosion resistance, non-toxicity, high strength, and good ductility.

Size(mm)Diameter(mm)Height(mm)
NO.16680
NO.27323
NO.37345
NO.46619
NO.56627
NO.66635
NO.76640
NO.86658
NO.966100
NO.1010023
NO.11100136

If you are interested in us, contact us now to get more detail! If you do not find the products you want, you can click another website: www.qimingpackaging.com. Or you can send the mail: mail@qiminggroup.com

Empty Tuna Cans

/in , /by

This blog is about the tuna tin cans 100ml, for example, the pressitin can, the two pieces tin can, the bottom tin can and the aluminum can.

empty tuna cans wholesale canada

But firstly, you should know about the production process of them and today we are mainly talking about that.

Many people may ask what tinplate cans are? In fact, tinplate cans are boxes or jars that made of tinplate, which are used to hold some things like canned food, powder, cookies, and so on. Its shape is also diverse, with round, square, heart-shaped, etc. As long as you want, then it can be made through the tinplate can process, tinplate cans are widely used in our lives, and the packaging of general things requires tinplate cans.

Each tuna tin cans 100ml is made by iron material-printing-cutting-stamping-assembly-packaging-step by step.

  1. Iron:

Generally, after confirming the order, we are going to purchase the iron material, test the quality

2. Printing:

What you should pay attention to in the printing process is to see whether the printing color is keeping up with the model, whether the set is accurate and if there are stain or scratches, etc.

3. Cutting:

After finished the printing, you can cut the material according to the row of cutting beds. When cutting the mattress, pay attention to the operator to see if they cut according to the blade line and whether the length is uniform. Whether the workers scratch each other during unloading, etc., the quality should be checked at the initial operating station.

4. Stamping:

Pressing iron pieces into shapes on a punching machine is the most important work of making a can.

5. Assembly

After the production is completed, the packaging department is responsible for cleaning and assembly, putting in plastic bags and packing. This step is the final work of the production and it is very important, so it must be cleaned before packaging, and then packaged according to the packaging rule. What should be paid attention to in the packaging process is to minimize the inflow of defective products into the finished product, and the quantity of packing must be accurate.

Ok, this is the steps of tin can’s production process. Welcome to leave messages here if you have any questions.

Welcome to your inquiry, please contact us at any time if you are interested in it! If you do not find the products you want, you can click another website: www.qimingpackaging.com. Or you can send the mail: mail@qiminggroup.com

production process

Empty Tuna Cans For Sale

/in , /by

Are you a manufacturer of canned tuna? Have you ever eaten tuna? If so, the following things are especially important to you. Empty tuna cans for sale has made it to the headlines of Qiming Packaging company. Let’s explore the reason behind it.

Empty Tuna Cans For Sale Item as below:

empty tuna cans wholesale canada
empty tuna cans for sale

Can Body:

wholesale food grade tuna tin cans

Double Seam Specification:

empty tuna tin cans

Canned tuna is an important variety of canned aquatic products, which have the effects of beauty, weight loss, liver protection, prevention of arteriosclerosis, and cholesterol-lowering. It can be eaten by the general population except for diarrhea. So do you know how to shop for a more satisfying canned tuna?

empty tuna cans wholesale canada
Tuna Cans-buy Empty Tuna Cans For Sale

1、Check the packaging: whether the packaging is sealed without damage. Do not buy them if they are raised or dented.

2, check the packaging label: label information is complete, including name, net content, manufacturer, address, contact information, ingredients, nutritional composition list, production date, shelf life, etc. Preferred products that are high in solids or fish and low in food additives, and are manufactured near the date.

3、Imported products are marked in the corresponding local language.

4, look at the state of the tissue: tight texture, tender, no blood clot, no hard fish spines, no impurities.

5, smell: fish scent, no odor.

From the above selection suggestions, it is clear that packaging is a critical factor whether it is albacore or yellow-fin tuna, plain tuna, five-spice tuna, oiled tuna, or eggplant tuna. Therefore, whether a manufacturer purchases the right empty cans or not determines to some extent whether it is competitive in the market price.

Because tuna muscle contains more sulfur proteins, it is generally used in full-coat tin cans that are resistant to both sulfur and acid. And our Qiming packaging empty tuna cans for sale is coated with a more environmentally friendly food grade aluminum paste. The interior and exterior of the Qiming packaging are coated with an anti-oxidation coating and are available in original tinplate color, silver, or other custom colors. Usually, we offer custom labeling services along with the promotion of empty cans.

 Qiming packaging of empty tuna cans for sale warm tips: keep in a cool place like the refrigerator. It won’t spoil or leak or have a bad smell because of can problems. Qiming packaging empty tuna cans for sale have good sealing, storage, light avoidance, sturdiness, not easily deformed and unique metal charm, strong oxidation resistance, shock resistance, fire resistance, high temperature, and high-pressure resistance, easy to use. In addition, our can production process is strictly controlled.

production process

Qiming Packaging guarantees quality in the production process and timeliness in the management, while at the same time developing a variety of specifications to meet the different needs of different customers.

Pet Food Tin Can Aluminum Can
Model NO. of tin cans Material Capacity Thickness Size
628# Tinplate 70ml 0.18-0.22mm Diameter 65mm * Height
636# (outer golden/inner white coating) Aluminum 80ml 0.18-0.22mm Diameter 63.5mm * Height 36mm
636# (outer golden/ inner original silver coating) Aluminum 80ml 0.18-0.22mm Diameter 63.5mm * Height 36mm
634# Aluminum 90ml 0.18-0.22mm Diameter 65mm * Height 34mm
634# Tinplate 90ml 0.18-0.22mm Diameter 65mm * Height 34mm
640# Tinplate 100ml 0.18-0.22mm Diameter 65mm * Height 40mm
728# Aluminum 90ml 0.18-0.22mm Diameter 73mm * Height 28mm
728# Tinplate 90ml 0.18-0.22mm Diameter 73mm * Height 28mm
730# Aluminum 95ml 0.18-0.22mm Diameter 73mm * Height 30mm
730# Tinplate 92ml 0.18-0.22mm Diameter 73mm * Height 30mm
732# Aluminum 100ml 0.18-0.22mm Diameter 73mm * Height 32mm
732# Tinplate 100ml 0.18-0.22mm Diameter 73mm * Height 32mm
840# Aluminum 170ml 0.18-0.22mm Diameter 83mm * Height 40mm
840# Tinplate 170ml 0.18-0.22mm Diameter 83mm * Height 40mm
842# Aluminum 180ml 0.18-0.22mm Diameter 83mm * Height 42mm
842# Tinplate 180ml 0.18-0.22mm Diameter 83mm * Height 42mm
846# (Laminated Steel technology) Tinplate 210ml 0.18-0.22mm Diameter 83mm * Height 46mm
846# (Enameled tinplate technology) Tinplate 210ml 0.18-0.22mm Diameter 83mm * Height 46mm
936# (bowl-shape can) Aluminum 150ml 0.18-0.22mm Top Diameter 99mm * Height 36mm
936# (bowl-shape can) Tinplate 150ml 0.18-0.22mm Top Diameter 99mm * Height 36mm
937# (bowl-shape can) Aluminum 154ml 0.18-0.22mm Top Diameter 99mm * Height 37mm
937# (bowl-shape can) Tinplate 154ml 0.18-0.22mm Top Diameter 99mm * Height 37mm
938# (bowl-shape can) Aluminum 157ml 0.18-0.22mm Top Diameter 99mm * Height 38mm
938# (bowl-shape can) Tinplate 157ml 0.18-0.22mm Top Diameter 99mm * Height 38mm
939# (bowl-shape can) Aluminum 161ml 0.18-0.22mm Top Diameter 99mm * Height 39mm
939# (bowl-shape can) Tinplate 161ml 0.18-0.22mm Top Diameter 99mm * Height 39mm
940# (bowl-shape can) Aluminum 165ml 0.18-0.22mm Top Diameter 99mm * Height 40mm
940# (bowl-shape can) Tinplate 165ml 0.18-0.22mm Top Diameter 99mm * Height 40mm

Thanks to the trust our customers have shown us. A 20% discount is now available for repeat customers. And three to five free samples are available for new users. It’s the peak season for canned tuna, are you ready for it?

Old clients introduce new clients. Both sides will have discounted coupons to claim. So what are you waiting for, contact us now.