What Polyethylene is used for?

/in /by

Polyethylene (PE) is a thermoplastic resin obtained by polymerizing ethylene.

It belongs to the alkane inert polymer, has good chemical stability, and is resistant to corrosion of acid, alkali and salt aqueous solutions at normal temperature. Because polyethylene is non-polar, it can be used as an insulating material or as a high-voltage insulating material. Under the action of the atmosphere, sunlight and oxygen, polyethylene will age, discolor, crack, it can become brittle or chalk, and lose its mechanical properties. Because polyethylene possesses these qualities and is easy to process, the degradable and recyclable research of polyethylene has far-reaching value.

Polyethylene materials are widely used for processing into films, wire, and cable sheaths, pipes, various hollow products, injection molded products, fibers, and the like. For example, a representative low-density polyethylene (LDPE), which is odorless, odorless, non-toxic, matte, milky white waxy particles, has a density of about 0.920 g/cm3, and a use temperature of -100 to 110 °C. It is insoluble in water, can withstand most of the acid and alkali erosion, has low water absorption, and can maintain softness and electrical insulation at low temperatures. Low-density polyethylene can be processed into various industrial products by processing methods such as injection molding, extrusion molding, and blow molding. It is widely used as packaging materials for various foods, clothing, medicines, fertilizers, industrial products, and agricultural films. It plays a pivotal role in the plastics industry.

We can see the presence of polyethylene in many scenarios. For example, in the industry, plastic end caps for industrial pipes, or protective plugs, flange protection caps, etc.

Plastic pipe caps or plugs are LDPE materials

* One piece construction. Injection-moulded. Up to 78. Internal ribs provide tight fit and release pressure build up.

* Sizes: Φ6mm to Φ1981.2mm

* Material: LDPE-low density polyethylene

* Color: Blue in stock,other colors customize

* Customized : Resistant to temperatures from -50 degrees C to +60 degrees C.UV-stabilised.

Multi sizes available to meet the different needs of the clients

* This unique design enables each plug to tight fit a large range of IDs of every Nominal Pipe Size up to 48 inch OD.

* Push-Fit design allows easy application of plug to pipes racked on the yard.

* Provides excellent protection from damage, dirt, moisture and corrosion during storage and transportation.

* Size: Φ6mm to Φ1219mm

* Material: LDPE, low density polyethylene

* Standard Color: Blue,other colors customized

* Customized: Resistant to temperatures from -50 degrees C to +60 degrees C.UV-stabilised

Multi sizes available to meet the different needs of the clients.

(The description of the PE application in this article only represents the author’s point of view. You are welcome to ask and exchange. The email address is mail@qiminggroup.com, thank you for reading.

Email: mail@qiminggroup.com Website: www.qimingpackaging.com

Cel: 0086-18849508258

How much you know about silicone and PE pet food lids?

/in , /by
  • pet lid plastic caps

What is the difference between Silicone and PE? How much you know about silicone and pe pet food lids?

Silicone:

Silicone material has excellent heat resistance, cold resistance, dielectric properties, resistance to ozone and atmospheric aging performance, The outstanding performance is that it can be used in a wide range of temperature, can be in 60 ℃ temperature (or lower) to + 250 ℃ temperature (or higher) use for a long time. It has excellent physiological inertia, non – toxic, tasteless.

PE:

PE is non-toxic, tasteless, has good low-temperature resistance (the lowest temperature can reach 70 ~ 100 ℃), chemical stability is good, It can stand most of acid and alkali erosion (acid). PE does not dissolve in solvents at normal temperature, small water imbibition, good electrical insulation performance. Under normal temperature, it is relatively hard, inelastic. When the temperature reaches 80 degrees, it begins to be softening. It will lost the use function at 150 degrees.

Detailed introduction of silicone and PE pet food lids

Application Cover various Pet Food Cans, food cans etc.
Size 65mm,75mm,85mm
Color Red, blue, green, yellow etc
Material Silicone
Feature Dust-proof, isolate bad odor
Weight 40g
Logo Available
Sample Free
pet lid plastic caps

Sizes difference between silicone and PE pet food lids. How much you know about silicone and pe pet food lids?

pet food can cover

pet food can cover

Tips For Maintenance Of Silicone Canned Lids

*Before the first use, please use hot water cleaning sterilization, after cleaning, please use a soft cloth wipe and store in a dry ventilated place.
*Please do not place it in a high temperature environment for a long time, so as not to affect its service life.
*It is important to note that container which is covered can not contain sharp edges or damaged edges to prevent scratching the silicone canned lids.
*If it is not used for a long time, please put it in a box without direct sunlight.

  • pet plastic cover lid for dog food can cat food can
  • pet plastic cover Pet Food Can Lids for dog food can cat food can

Characteristics
Helps to keep pet food fresh.
Can also be used on standard food tins.
Durable plastic material.
Internal measurement approx. 75mm & 88mm(fits 32oz & 13oz tins)
Easy to use, prevent the unpleasant smell of opened food cans.
No special tool required

If you find the product you need, please contact me. We are online 24 hours a day. Our another website is www.qimingpackaging.com.

An introduction to plastic folding crates

/in , /by

We have a lot of messy things in our life. If we put them in a random place and don’t know where to put them when we want them, we have to go all out to find them. It takes time and space. If such a problem arises, it can be solved with a plastic folding crate. You can use the plastic folding crates to collect your sundries so that you can find them next time you use them. Plastic receptacles are very good in materials and do not add harmful substances. There are many kinds of plastic folding crates on the market. Here’s the size of plastic plastic folding crates and related introduction.

  • 100% brand-new PP material, strong bearing capacity, bright color, corrosion resistance, non-toxic, odorless, in line with safety standards, high temperature resistance
  • Coarsening and Lengthening Pillar Combination Design, Convenient and Fast Combination of Parts Box, Can Be Used as a Shelf, Save Space, Effectively Improve Utilization Rate.
  • The side and bottom of the toolbox are designed with encrypted reinforcing bars, which can enhance the compression resistance, load-bearing and durability.
  • The side of the box has corresponding latch design, which can be combined.

Application:Fruit and Vegetable Distribution, Warehousing Logistics, Deep Processing of Agricultural Products, Industrial Production Turnover, Home Acceptance

The cover is reversed, and the connecting cover is convenient.

Folded stack, clip can be added for classification

The bottom is thicker and the load-bearing is strengthened. Wear-resistant and durable, long-term use.

If you are interested in us, contact us now to get more detail! If you do not find the products you want, you can click another website: www.qimingpackaging.com. Or you can send the mail: mail@qiminggroup.com

Plastic Collapsible Crates Plastic Folding Crates

Why Plastic Foldable Storage Basket so popular?

/in , /by
  • Plastic Collapsible Crates Plastic Folding Crates
    Plastic Collapsible Crates
  • Plastic Collapsible Crates
  • Plastic Collapsible Crates

Plastic foldable storage basket has moved to many families. It’s also very popular. But what is plastic
foldable storage basket?Now let me introduce it:

  1. High-quality materials, using new PE materials, odorless, anti-aging and fall resistance
  2. External reinforcement design, making the whole more solid, not easy to deform, longer service life
  3. Bottom Thickening Design, Smooth Edge, Greater Bearing, More Slip-proof, Safe to Use
  4. Air permeability design, uniform distribution of air permeability holes, meticulous workmanship, drying and deterioration prevention, while facilitating the observation of items in the box
  5. Plastic baskets can be stacked and placed, which has strong gravity resistance and will not crush the bottom items, thus effectively avoiding damage during transportation.
  6. Convenient basket circumferential movement and smooth grasp will not scratch hands, save time and effort.
  7. There are rectangular, oval, round ears, large, medium and small models.
  8. Integrative injection moulding is durable, with large capacity and wide application range.
  • Plastic Vegetable Baskets application

Application:Fruit and vegetable basket turnover basket Aquaculture transport basket empty mesh turnover basket, mechanical parts, refrigeration, storage, transportation and other industries.

Sizes available:

Out size Inner size Loading capacity Weight
600*400*170MM 565*370*165MM 30KGS 1.87KGS
600*400*210MM 565*370*205MM 40KGS 2.22KGS
600*400*290MM 565*365*275MM 50KGS 2.37KGS
600*400*340MM 565*365*325MM 50KGS 2.57KGS
530*410*180MM 500*380*170MM 30KGS 1.97KGS
530*410*300MM 500*380*290MM 35KGS 2.67KGS
650*330*245MM 620*300*230MM 50KGS 2.05KGS
Customized Size and Color Available On Plastic Collapsible Crates Collapsible Containers Folding Storage Boxes

Our advantages:

  • FREE samples available for quality test.
  • Require OEM or ODM service? Available! Email us now! sales@qiminggroup.com
  • Production abality: 10000 pcs per day.
  • Enough stock for supply.
  • Any quality problem, after confirm from each side, accept exchange or give your money back.
  • We are online in 24 hours
  • Fast delivery by sea or express or any shipping terms as your request.
  • Accept several payment terms such as TT, Western Union, Paypal etc.

If you don’t find the product you want in the video, please contact me. We are 24 hours online.

ibc tote lids

The Usage Of IBC Tote Lids

/in /by

Qiming packaging IBC tote lids are mainly used in IBC containers, 375-gallon drum. 9 inch and 6 inch IBC top lids are available. IBC lids adopt HDPE, with EPDM gasket, there are many features: Durable, Economical, Safe, Easy Operation, Non-spill, Anti-corrosion… IBC vented lids and IBC solid lids are in stock. And if you want other IBC fittings, IBC adapters and IBC valves are all available.

IBC Tote Lids are specifically designed for using in IBC (Intermediate Bulk Container) / Tank applications. 275-330 gallon IBC Tote Tank 1000L Intermediate Bluk Containers

Size: 6 inch&9 inch Solid IBC Tote Lids

Size: 6 inch & 9 inch IBC Tote Lids with 2 inch Drum Bungs

Made of high density polyethylene
FDA approved safe for food products
Can also provide chemical resistance
This cap will fit Fits Schutz, Mauser, Greif, Passport, Bonar, Ultratainer, Megatainer, Clawson, Mamor, Snyder & Many Other Brands & Models Of Plastic IBC’s, Totes, Bulk Storage Containers & Spray Tanks
Excellent cap, especially if you need to drill out for down spout or bulk head fitting through the top!


  • Color: Black, red, white are in stock, can custom as per request
  • Size: 6 inch and 9 inch
  • Type: Vented and solid IBC tank lids
  • Thickness: 8 mm as usual, your special requirement is accepted
  • Feature of our IBC tank lid: Durable, Economical, Safe, Easy Operation, Dust-proof, non-spill
  • Gasket: EPDM gasket ring ,black or clear transparent
  • Purposely designed fittings to ensure ease of use and secure operation of the off-loading of IBCs whose valves often use buttress threads .
Ask for quotation
Plastic jerry can

What if the plastic jerry can is on fire?

/in , /by

Plastic jerry can is used to hold diesel, gasoline and other motor oil. What should we do if the plastic jerry can is on fire? If the diesel fires, how to properly extinguish the fire? Let me talk about some tips to extinguish the fire.

plastic jerry can
  • 1. Plastic jerry can must not be splashed with water. Because oil is lighter than water, splashing with water can cause diesel to splash out. Foam fire extinguishers are also not allowed. The foam is injected, and the water sprayed is very powerful, which will cause the oil to splash and cause a larger area of fire.
  • 2. If there is a 980ml water mist type water-based fire extinguisher on hand, it is available. The water mist fire extinguisher is not pressurized, and the water mist is sprayed. The surface of the oil is covered with oxygen to cool down and then to extinguish the fire. But the 980ml water mist is too small, if the fire is too big, it is difficult to control.
  • 3. Therefore, it is recommended to use a dry powder fire extinguisher for diesel fire. The dry powder will cover the surface of the oil and will decompose due to high temperature. The effect is good. If the fire is heavy, you can use a dry powder cart.
  • 4. The most important thing is to clean up the combustibles around the plastic jerry can such as the other jerry cans or combustibles before the fire extinguishing, to prevent the fire from spreading rapidly.
  • 5. Attention before using the dry powder fire extinguisher: 1) See (the pressure gauge pointer is in the green area); 2) Shake (shake up and down to make the fire extinguishing agent even); 3) Pull (unplug the insurance); 4) Stand (standing on The tuyere prevents the dry powder from being blown up by the wind and mixing the smoke to blinds the eyes; 5) Spray (align with the root of the flame, spray left and right), six, process (to continue to process site after the fire extinguishing to prevent re-ignition).
  • plastic jerry can
    plastic jerry can
  • plastic jerry can
    plastic jerry can

The most effective method of extinguish the fire is fire smothering. Covering and seal the opening location of the plastic can from the upwind by the asbestos quilt to achieve the effect of extinguishing the flame. If there is no asbestos quilt, cotton coat or quilt soaked with water is available. Note: Throwing the asbestos quilt is just first step. Be sure to press the asbestos quilt one by one along the mouth of the plastic jerry can to achieve complete sealing and air isolation. Do not remove the asbestos quilt in a short period of time, and do not open a corner of the asbestos. Otherwise the flame that is not completely extinguished will suddenly pick up the injured person after a short time of re-exposure to the air. After the asbestos quilt is compacted, observe the change of the asbestos in the jerry can’s mouth, and then remove it after it is obviously recessed. The reason is that the burning of the flame consumes the oxygen in the jerry can, causing the volume of gas in the can to decrease and the asbestos being sucked down. At this time, the asbestos can be removed for further processing.

Various plastic jerry cans available.

  • plastic jerry can
  • plastic jerry can
  • plastic jerry can
  • plastic jerry can
  • plastic jerry can
  • plastic jerry can

Application

More details about plastic jerry can.

Different sizes for your reference.

plastic jerry can
4 L Plastic Jerry Cans
plastic jerry can
1L Plastic Jerry Cans
plastic jerry can
80ml/350ml/200ml Plastic Jerry Cans

Specification

Capacity Size
200ml 68*40*175mm (L*W*H)
300ml 62.3*162mm (Bottom Dia*Height)
750ml 113*57*238mm (L*W*H)
800ml 82*26*130mm (Bottom Dia*Top dia*Height)
1L 116*62*222mm (L*W*H)
104*66*240mm (L*W*H)
110*78*222mm (L*W*H)
134*61*205mm (L*W*H)
130*67*220mm (L*W*H)
2L 171*107*249mm (L*W*H)
4L 225.4*93.3*336mm (L*W*H)
184*128*321mm (L*W*H)
195*103*318mm (L*W*H)
220*117*298mm (L*W*H)
6L 280*360mm (L*H)

Why choose Qiming Packaging?

Qiming plastic drum bungs

Just the typical types in the video for your reference. If you can not see your fancy one in the video or above product display image, please describe your requirements in detail or send us the picture you are currently using now, we will make customized service especially for you. So mail us now! info@qiminggroup.com

Round Tin Cans Tinplate Pails

An Introduction To Tin Can

/in , /by

An introduction to tin can: Tin can，is made of tinplate, tinplate is the surface of iron to tin. In order to play a protective role. Generally speaking, for the sake of the exquisite packaging, printing is used, commonly known as printing tin can.

  • tin cans tinplate cans for tomato sauce
  • Round Tin Cans Small Tinplate Pails Tinplate Cans --Qiming Packaging
  • Round Tin Cans Metal Buckets Pails Round Tinplate Cans
  • Gel Chafing Fuel Refill Can

tin can

Application: Food Cans, Drug Cans, Tea Cans, Minced Meat, Fish, Bird’s Nest

tin can

The advantages of iron cans are as follows:

  1. Good mechanical properties: Compared with other packaging containers, such as plastic, glass and paper containers, the tinplate aluminum can has high strength, good rigidity and is not easy to crack. Not only can it be used in small sales packaging, but also it is the main container of large transport packaging.
  2. Excellent barrier property: Aluminum can of iron can has better barrier property than any other material. It has good gas barrier, moisture proof, light shielding and fragrance retention. Besides, it has reliable sealing and can reliably protect products.
  3. Beautiful appearance. Food grade coatings, coatings of different colors
  4. Process maturity and high production efficiency: production history is long, process maturity has a complete set of production equipment matching it, high production efficiency, can meet the packaging needs of various products.

Sizes

Capacity SIZE(mm)
LOWER DIA*HEIGHT*UPPER DIA
0.1L 60*44*46
0.2L 60*74*46
0.3L 80*68*65
0.4L 80*82*65
0.45L 80*101*65
0.5L 95*81*80
1L 110*116*86
1L 110*128*86
2L 165*120*139
3L 155*184*127
3L 165*150*139
1 gallon 165*191*139
4L 165*196*139
5L 177*230*149
12.5L 240*342*240
26L 272*450*284
25L 272*433*284
20L 272*360*284
18L 284*330*272
15L 272*290*272
10L 227*290*240

If you don’t find what you want in the video, please don’t hesitate to contact me. We are online 24 hours a day.

PVC clear plastic egg trays

What you have to know about the PVC egg tray

/in , /by
plastic egg tray
  • PVC egg trays

PVC egg trays

  • Quail egg trays

PVC egg trays

  1. Food grade special PVC raw materials: PVC raw materials, flexible, non-toxic, tasteless, safe and environmentally friendly, recyclable.
  2. Transparent egg position, independent slotted egg position, prevent knocking, easy to place, transparent design, easy to observe.
  3. Dust-proof and moisture-proof, sealed and fresh-keeping
  4. Self-contained buckle, no need for other tools, just press can be stuck, convenient and fast. There is a space between the locks to provide breathable air holes for eggs, keep them fresh and increase the shelf life of eggs.
  5. Edge bulge design, easy to open, time-saving and labor-saving, simple and convenient
  6. Earthquake-proof effect: Earthquake-proof column design, convenient multi-layer placement, strong load-bearing, vibration and displacement of eggs placed
  7. Square shape, can be superimposed, neat and beautiful, more balanced, and save space
  8. Beautiful and easy to use, smooth edges, no burrs, warm feel, not easy to aging
  9. Labeling on top of egg tray
  10. Various sizes, 6 holes, 10 holes, 12 holes, 20 holes, etc. can be selected, but also customized size.

Applicaton of PVC egg trays: Packaging, transportation and refrigeration of eggs, duck eggs, quail eggs, etc.

Our Advantages

FREE samples are available for quality test.

Require OEM or ODM service? Available !Email us now! sales@qiminggroup.com

Production abality: 10000 pcs per day.

Enough stock for supply.

Any quality problem, after confirm from each side, accept exchange or give your money back.

We are online in 24 hours

Fast delivery by sea or express or any shipping terms as your request.

Accept several payment terms such as TT, Western Union, Paypal etc.

Egg Tray Type Size Of Tray (L*W*H) Size Of Hole (L*W*H) Weight
6 holes egg tray 150*102*65mm 42*42*65mm 15g
8 holes egg tray 198*103*65mm 42*42*65mm 22g
10 holes egg tray 240*102*65mm 42*42*65mm 24g
12 holes egg tray 292*103*65mm 42*42*65mm 32g
15 holes egg tray 240*150*65mm 42*42*65mm 34g
20 holes egg tray 240*192*65mm 42*42*65mm 45g

These are our usual sizes.If you don’t find the size you want, please don’t hesitate to contact me.

If you are interested in this product, please do not hesitate to contact me. We are online 24 hours.

Plastic vegetable basket

Check list on plastic vegetable baskets

/in , /by
  • Plastic vegetable basket
  • Plastic basket
  1. Food grade PE raw materials: PE raw materials, strong bearing capacity, high -temperature resistance, non-toxic and tasteless, environmentally friendly and recyclable, hygienic and easy to clean.
  2. Strong and durable appearance, reusable, can be stacked to more than 10 layers.
  3. Design of reinforcing bars, anti-fall, anti-aging, anti-freezing and high temperature.
  4. Strong and durable, good corrosion resistance to various acids and bases
  5. Thicker bottom, anti-skid ring in the middle, prominent part in the four corners, anti-skid.
  6. Multi-empty grid design, load bearing and increase the air permeability of goods at the bottom of the leak.
  7. Anti-skid function at the bottom, easy to stack: the bottom is tightly reinforced and adopts anti-skid and anti-theft design, without worries about manuscripts.
  8. Smooth corner design, handling and unloading process to avoid scratches, and surface mandarin, comfortable grip.
  9. Clean and beautiful: beautiful outline, not easy to dirt, easy to remove dirt
  10. Smooth and smooth surface without backstabbing, good stability for placing articles
  11. Various sizes, optional customizable size.
  • Plastic Vegetable Baskets application

Plastic vegetable baskets can be used for transportation and storage of vegetables and fruits, household, factory acceptance, food processing and storage, turnover, cleaning, brewing, fermentation, pickling, and storage in the vegetable processing industry.

  • 100% brand-new material, guaranteeing no return
  • Advanced production equipment, adequate spot memory
  • 48 hours of rapid delivery, strict quality inspection process before delivery to ensure product quality
  • Have a complete and scientific quality management system

vegetable baskets Sizes available

If you don’t find what you want in the video, please don’t hesitate to contact me. We are online 24 hours a day.

plastic tray

Application Of Plastic Vent Trays

/in /by

Qiming plastic vent trays adopts new HDPE, low voltage, and high-density polyethylene. It is widely used for drying, self-drying, and freezing, draining. Strong air permeability and all of our Plastic Vent Drying Trays can be stackable All the raw material is of the character of thickening, anti-aging, anti-corrosion. Plastic drying trays are highly durable for a long lasting life and simple to clean. The size of the plastic vent trays is complete. And we can custom colors for you.

Qiming packaging plastic vent tray drying tray

Application:

  • Drying/Draining: pasta, plant leaf, tobacco, tea, medicinal materials, soft gel, spice, vegetable and fruit
  • Freezing: seafood (Sea cucumber, trepang, shrimp, fish and crab)
  • Baking: preserved fruit candied fruit dried fruit
Plastic drying trays plastic freezing trays
Qiming plastic vent tray pasta drying tray
Model number Outer (length*width*height)
#LK1 595mm*395mm*50mm
#LK2 800mm*600mm*50mm
#LK3 1000mm*440mm*40mm
#LY4 590mm*390mm*60mm
#LY5 735mm*440mm*70mm
#LY5 805mm*590mm*70mm

Characteristic

  • High quality material: HDPE
  • Bottom leakage
  • Thickening
  • Uniform distribution of mesh
  • Complete Sizes
  • Custom color
  • Fine workmanship


Just the typical types in the video for your reference. If you can not see your fancy one in the video or above product display image, please describe your requirements in detail or send us the picture you are currently using now, we will make customized service especially for you.So mail us now! mail@qiminggroup.com